MartyX Grover
- Total activity 2288
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 1
- Subscriptions 713
Comments
Recent activity by MartyX Grover-
Thank you very much. The white display does not look like a typical Frames Not Received scenario, as those words would be displayed in red lettering at the center of the RGB panel if it were. It ...
-
Hi Simeonb Could you left-click on the small up-arrow in the bottom corner of the Viewer window please to open the Debug Log interface and then activate the RGB stream and let me know what the log...
-
The depth and RGB exposures use different scales of value, with large values for depth exposure (default 8500) and small values for RGB (default 156). I located a reference in the librealsense SDK'...
-
Next, could you try disabling the GLSL options in the Viewer's settings using the instructions in the link below to see whether it makes a positive difference to performance. https://github.com/Int...
-
If you are searching for developers who can provide solution development services, the website at the link below may also be helpful. https://www.intelrealsense.com/development-service-vendors/
-
Hi Cristian Vilar My understanding is that the unit of exposure is in milliseconds (ms) and its value can be controlled with microsecond (usec) granularity. https://github.com/IntelRealSense/lib...
-
I ran depth + RGB tests in version 2.45.0 of the SDK (the one that you are using) and found it far more difficult to generate a frame drop by doing so than in previous SDK versions, whether Auto-Ex...
-
I note that in the image of the RGB section above, you have RGB Auto-Exposure disabled (black box beside it). Auto-Exposure is not the same as Auto-Exposure Priority (which does need to be set to ...
-
Hi Dmitry Isaev The RealSense UWP driver (6.1.160.22) is not required to use RealSense cameras with Windows. Its purpose is to provide RealSense compatibility with interfaces that use Microsoft's...
-
Hi Blake58 Is your camera on a USB 2 connection, or plugged into a USB 3 port but being detected as USB 2? The error message RuntimeError: Couldn't resolve requests indicates that the SDK cannot ...