MartyG
- Total activity 5964
- Last activity
- Member since
- Following 0 users
- Followed by 7 users
- Votes 3
- Subscriptions 1820
Comments
Recent activity by MartyG-
Hi F Werner A reply to your question has been posted at the link below. https://github.com/IntelRealSense/librealsense/issues/13036
-
As your depth stream is working, please try using the instructions at the link below to reset the camera to its default factory-new calibration settings in the RealSense Viewer. https://github.com/...
-
If the FPS speed of depth and RGB are the same then sync of their timestamps should kick in automatically, as described at the link below. https://github.com/IntelRealSense/librealsense/issues/1120...
-
Hi Noah The link to the multiple camera white paper is below. https://dev.intelrealsense.com/docs/multiple-depth-cameras-configuration
-
I am not aware of any suppliers of pre-made RealSense hardware sync cables. They are usually assembled by the RealSense user from individual components.
-
RGB and depth frames have a temporal offset bounded by a period of one frame, and wait_for_frames() finds the best match between their timestamps. https://github.com/IntelRealSense/librealsense/iss...
-
Hi Megan001222 Can you confirm please that you are enabling the camera in the RealSense Viewer's options side-panel by clicking on the red icon beside RGB Camera and not using the 'Add Source' but...
-
Hi Juan Diezyanguas Are the depth frames saved correctly if the C# script at the link below is used, please? https://github.com/IntelRealSense/librealsense/issues/8752#issuecomment-891683173
-
Hi Bob P King Aside from the electronics diagrams in the multiple camera white-paper document, there is additional sync cable parts and assembly guidance at the link below. https://support.intelre...
-
It does sound like there is slow improvement. It may be worth giving it a few more days of sunlight to see how it progresses.