Karthikeyan Yuvraj
- Total activity 19
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 4
Activity overview
Latest activity by Karthikeyan Yuvraj-
Karthikeyan Yuvraj commented,
Thanks MartyX Grover. We are trying to do calibration on raw images from the D455 camera and then upload the results to the camera itself. The max resolution for D455 is at 1280x800 (and it does ...
-
Karthikeyan Yuvraj commented,
MartyG: Sorry, I dont understand your reply. Please let me know on: 1 . why are we getting the bayer pattern on D455 model? 2. Or why is it more visible on D455 compared to D435 and D415?3. Can I ...
-
Karthikeyan Yuvraj created a post,
Bayer filter applied on IR image from D455
Hello All,D455 (at firmware: 05.13.00.50) image below is from the IR sensors (configured at 1280x800 resolution and IR images are at Y16 format).As you see the image below has the bayer filter appl...
-
Karthikeyan Yuvraj commented,
Ok fyi, I updated the camera to the latest version 05.13.00.50 and still, we have the same issue.
-
Karthikeyan Yuvraj commented,
thanks for the reply. My camera is at 05.11.01.100
-
Karthikeyan Yuvraj commented,
Hello MartyG,Thanks a lot for your reply. The camera is in an indoor location (and no sunlight), but the camera is facing straight ahead at the whiteboard (which is bright), maybe this is causing i...
-
Karthikeyan Yuvraj created a post,
IR Image with auto ir exposure is dimmer than manual on D415 cameras
This is an IR image (of IR1 and IR2) with auto-exposure enabled: and this is an IR image (of IR1 and IR2) with manual exposure: Any thoughts on why the IR image with auto-exposure enabled is dimme...
-
Karthikeyan Yuvraj created a post,
Capturing images from a D415 and D455 simultaneously.
Hello All,I am streaming the depth and RGB images from a scene simultaneously using D415 and a D455 camera. Will this cause interference in the depth images between the 2 cameras?. Let me know. Tha...
-
Karthikeyan Yuvraj commented,
Thanks for the reply MartyG. Regarding your question: Are you developing your tool using the Dynamic Calibration API's Programmer's Guide version of the user guide, please? No I am not using th...
-
Karthikeyan Yuvraj commented,
thanks for the reply. In my approach, I am not using the dynamic calibration tool for calibration. I am only using its read and write capability. The calibration is done by our custom-developed too...