Baltabai K
- Total activity 25
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 4
Comments
Recent activity by Baltabai K-
It is fixed to a mount. And mount is stable
-
Here, this problem occurs in RealSense Quality Depth Tool and Viewer. Here we see that angle is 0.9 degrees. Same RealSense Box (14.2 cm x 9.1 cm) length is 14.3 cm, but width... 8.3 cm instead ...
-
Ok, thanks. We are using pyrealsense2's align function.
-
We don't use RANSAC for defining FOV, we just to find floor. We are also using plane fitting for finding angle, we already did asked for your help for that. Is this because of different FOVs of two...
-
Yes, we are aware of plane fit algorithms, we are using RANSAC for our purposes, but I suspect that the problem is with FOV of D455, because measurement was fine on D415
-
Thanks for answer, but we still have a problem with measuring in horizontal axis, we did aligned frames and using default resolution (848x480). Decimation filter makes it worse (we still didn't fou...
-
Yeah, that's right, we are using pointcloud. But we also did calibrate our camera with intel app on galaxy smartphone with resolution 2280x1080. Also we are using spatial and temporal filters, las...
-
Forgot to add, we already aligned depth and colour frames, we are using default preset, and checked in realsense viewer. In realsense viewer, using measure tool it shows correct data, both width an...
-
Thanks!
-
Again, thanks for quick reply. Not at 2 metres exactly, somewhere at 70 cm to 2 - 2.5 m, at close range we want to achieve accuracy of 1 - 2.5 mm, at long ranges we can neglect 3 - 5 mm.