Damian Locher
- Total activity 8
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Damian Locher-
Damian Locher commented,
mhm ok that could be the problem. but why was the camera not recognizable at the first beginning? How can i tell the camera that she is a 435i. with a separate firmware maybe?
-
Damian Locher commented,
ok i can say that the cam not goes in to "recovery mode"... i can see the cam after the upgrade in the DFU Tool (Video 2) but not in the Viewer or other Software. The cam came new to me with 5.11...
-
Damian Locher commented,
Hi MartyG, Thanks again for your reply! sry for the downtime of the videos..Firmwareupgrade the NAS.... Put it in my Google Drive. https://drive.google.com/open?id=1mEdERatIgIHxE7rmr9UKUkn_gLXB1el1...
-
Damian Locher commented,
Hi MartyG and other 435i useres, Same problem with a new Cam! so it have to be my Config.... or another defective Cam ?! I took some video footage from the upgradeprocess.. https://www.myqnapcloud....
-
Damian Locher commented,
Hey MartyG thanks again for your fast reply! i already try the actual Firmware on this page. Once with the viewer and then via the DFU flash tool. The Cam is still not recognizable after that upgra...
-
Damian Locher commented,
Hi MartyG, Thanks for your fast reply ! I have done 8 downgrades just to see wich Firmware are working in my Setup. thanks for the info with the limitation of downgrades ! nice to know. can i reset...
-
Damian Locher created a post,
Firmwares of Realsense 435i recognizabillity in Windows 10 Pro
Hi Realsensers, i try lots of Firmwares with my Computer with following specs: - Win10 Pro (Version 10.0.18363 Build 18363) with update 1909 - Asrock Z97 Extreme6 - I7 4790k not overlocked - 16gb R...