Johann Burgstaller
- Total activity 8
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 2
Activity overview
Latest activity by Johann Burgstaller-
Johann Burgstaller created a post,
Documentation of parameters in advanced mode for D415
We are currently experimenting with advanced mode settings of the realsense d415. To have a starting point, we need a complete description of the meaning of the individual parameters as well as the...
-
Johann Burgstaller created a post,
The best possible depth-result of D435i for an object at a distance of about 50cm?
The object of interest is a concrete slab 40x60x2cm. I would get the best possible depth information for the cutouts on the slab. So I am only interested in depth values of pixel located 50 to 53 c...
-
Johann Burgstaller commented,
So we will try with the D415. Thank you for your advice!
-
Johann Burgstaller commented,
"An easier approach to sensing depth though may be to take an untextured monochrome 3D model of the hole. Defects should show up easier to the human eye on such a model without the distraction of c...
-
Johann Burgstaller commented,
We have already tried this but the impurities, which are in fact small obstackles of the same concrete within the cutouts due to production errors, can hardly be "seen" in an rgb image . Therefore ...
-
Johann Burgstaller created a post,
I have to use an intel realsense d435i to check the existence of contaminants in concrete slabs with recesses for hoses. Which parameters of the d435i do I have to configure?
The concrete slabs are approx. 50 cm away from the camera and are 40x60 cm. The recesses for the hoses are 15mm deep and 15mm wide. Impurities > 1.5mm in diameter inside the recesses should be dete...