Shenlingwushi123
- Total activity 10
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2
Comments
Recent activity by Shenlingwushi123-
I have tried this method. The two slave cameras work normally, and there are no prompt No Frames Received. But they look like they have not received the synchronization signal and receive the frame...
-
I just tried the method you mentioned.When I set the Inter Cam Sync Mode of the slave camera to 0 (unsynced) and run at fps of 90, they all work normally. This should indicate that there is no prob...
-
Thank you for your patient answers and links. I have carefully read all the documents you recommended to me, which is very helpful to me.I may not describe my problem clearly. I connected the circu...
-
When I use genlock mode (set the master to 1 and the remaining two slave cameras to 4), I found that the two slave cameras did not receive the frame, which should indicate that my circuit is not co...
-
Thank you for your detailed reply. Through your reply, I have successfully connected the camera (one master and two slaves).I want to ask three questions:(1) I used set_option(rs.option.exposure, 3...
-
Hi MartyG Thank you for your detailed reply.I don’t know much about hardware, so I would like to ask some more specific questions about the above question 1. 1. About this picture. My situation is...