Ryan Lee
- Total activity 21
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 3
Activity overview
Latest activity by Ryan Lee-
Ryan Lee commented,
Hi, Thank you for checking. We are clear with your detailed information for us. Thanks again, Best regards, Ryan.
-
Ryan Lee commented,
Hi, Thank you for your quick response. Then D401 is only available with D4 V4(USB Micro B) and D4 V6(GMSL FAKRA ). That means D401 only works with USB Mircro B) not USB C at the USB point of view. ...
-
Ryan Lee created a post,
Vision Processor D4 Board (V4) (USB3 Peripheral Micro-B) Connection.
Hi, I would like to cross check one thing for your Vision Process D4 Board V4. It seems USB3 Peripheral Micro-B. and V1 and V3 is USB Peripheral Type-C like below. Then How can we buy your V1 and ...
-
Ryan Lee commented,
Thank you for all of your information. 2. you mentioned " It is much easier to use a pre-built Vision Processor D4 Board though if possible to do so" ==> does it means "D450 depth module and Vision...
-
Ryan Lee commented,
Hi, Thank you for your information. that helps me a lot to understand. But i have some more questions please understand me. 1. May you share the picture of your heat sink with its size information?...
-
Ryan Lee commented,
Ok, we understand now. We have one more question. For our project may we buy the heat sink you are using from you? or could you connect us the company who can sell it for us?? Best regards, Ryan.
-
Ryan Lee created a post,
about RealSense™ Depth Module D450 + Vision Processor D4 Board V3 IMU Bundle
Hello, I have a product inquiry. Our first question, We are curious if "RealSense™ Depth Module D450 + Vision Processor D4 Board V3 IMU Bundle (8 Pack) " has the same specifications as the RealSen...
-
Ryan Lee commented,
Hi, We tried your solution but it seems not working. and it is within a year. So may you help me to go RMA phase? Below is the image we tested based on your guidelines. Best regards, Ryan.
-
Ryan Lee commented,
1. I think left one is more holes than right and again both are same model (D455f) 2. If we conclude, it is hardware issue. Then do you have anything can do for it? such as RMA or..... Best regards...
-
Ryan Lee commented,
Hi, I double-checked about it. Left and right both are D455f now. Could you give us your comments about it based on this again? Sorry if we are not giving you enough information in our previous rep...