MartyG
- Total activity 5964
- Last activity
- Member since
- Following 0 users
- Followed by 7 users
- Votes 3
- Subscriptions 1820
Comments
Recent activity by MartyG-
I recalled a previous discussion for importing a ply file into MATLAB and looked up its details. There is a ply import tool available for MATLAB that converts a ply to a MAT file with XYZ coordina...
-
I hope that the link below will be helpful for you. https://answers.ros.org/question/291212/create-pointcloud2-in-matlab/ A person within that discussion said that they had written a utility for t...
-
I'm pleased I could be of help. Good luck with your Windows 7 project!
-
I researched your question very carefully. My best guess (not certainty) is that setting the D43x models' emitter strobing setting to '0' (false) with the instruction RS2_OPTION_EMITTER_ON_OFF may...
-
Here is a chart of the formats and their description. My memory is that not all of the formats in that table, such as the raw ones, are accessible through the RealSense SDK software. Y16 is IR d...
-
Intel traditionally try to pitch RealSense at the lower end of the price range, which means that the components tend to be at the consumer end of the market and powerful capability is provided thro...
-
Thanks for your continued help, Btasa! Nstepin, you said that you wanted to get the raw data from the edge. That implies to me that you want the raw data captured by the camera hardware and not a ...
-
The RealSense 400 Series cameras are extremely flexible in regard to hardware requirements. They should work with any Intel or ARM processor, whatever its capabilities. There have been a small nu...
-
I'm glad I could be of help! The Chief Technical Officer of the RealSense Group at Intel (agrunnet) discusses the depth resolution of the 400 Series cameras in detail in the link below. https://git...
-
All of the above information was sourced from here: https://forums.intel.com/s/question/0D50P0000490XiJSAU/matlab-rgb-point-cloud