Sasabukreev808
- Total activity 9
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 3
Activity overview
Latest activity by Sasabukreev808-
Sasabukreev808 commented,
As I understand, this microcircuit comes with the camera when you buy it. It has two ports through which the camera can be connected. One is on top of the chip (if it is perpendicular to you), and ...
-
Sasabukreev808 created a post,
Question about microcircuit
The mircocircuit has two fields where you can connect a camera. Do I understand correctly that one of them is used for debugging, and the other is used for normal purposes?
-
Sasabukreev808 commented,
Sorry for such long answer delay. I use D415. Today i have tried to unplug and flip the connector but these acts didn't help me out. I also tried to use different cables but result is the same. Reg...
-
Sasabukreev808 created a post,
Camera shows frames only in realsense-viewer and only if „Enable hardware logs” option is turned on
Hello! I have encountered a problem when i wanted to add a camera to my project. It shows me frames only in Intel's special program and only when i turn on “Enable hardware logs” in general logs zo...
-
Sasabukreev808 commented,
Thank you for your answer! May i clarify one detail? You mentioned that my USB cable may cause such problem and if i change it to another one it will solve the problem? Tell me also please, for thi...
-
Sasabukreev808 created a post,
Frames didn't arrive in 5 seconds
Hello! I have encountered an issue: my program haven't received any frames from the camera Intel RealSense Depth Module D410. The same problem is in the realsense-viewer. What can cause this troubl...